The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Acoustics can be optimized using Butterworth, Bessel and Linkwitz-Riley filters with selectable roll-off which can be configured as Low / High & Band Pass and the 7-Band equalizer which has adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using a password or USB-key protection.
Loudspeaker protection is provided by an output power limiter whereby the maximum output power for every channel (in Watt) can be configured. Configuration is made simple with loudspeaker presets and full system configurations which can be selected from a library and uploaded with a USB flash drive. This ensures the best acoustical performance with bullet-proof loudspeaker protection.
Great flexibility and source compatibility is achieved via the input selection matrix combined with the XLR and terminal block signal connections.
The outputs are made using Speaker and Terminal block connections. System integration is made easy using the RS-232 control port. An optional Dante™ interface is available for the WaveDynamics™ amplifiers. The installation of this network interface allows receiving and sending of low latency, high-quality audio over a standard Ethernet network.
- Lightweight class-D amplifier
- 2.5″ LCD display with intuitive user interface
- Optional Dante™/AES67 expansion port (ANI44XT)
- RS232 control
- Speakon compatible & terminal block output connections
- XLR & terminal block input & linkthrough connections
- Advanced DSP and loudspeaker management
- WaveDynamics™ speaker & set configurations
|Frequency||Response (± 3 dB)||20 Hz – 20 kHz|
|Signal / Noise||> 95 dB|
|THD+N (@ 1 kHz)||< 0.05% (1/2 Rated Power)|
|Crosstalk (@ 1 kHz)||> 70 dB|
|Inputs||Sensitivity||-19.5 dB ~ 27 dB|
|Impedance||10 kΩ balanced|
|Connector||XLR & 3-pin Euro Terminal Block (3.81 mm)|
|Outputs||Connector||Speakon compatible & 2-pin Euro Terminal Block (5.08 mm)|
|Common mode rejection ratio||70 dB|
|Damping factor||> 200|
|Protection||Amplifier||DC Short circuit|
|Access||User & Administrator level (Through password and USB-key protection)|
|Cooling||Temperature controlled fan|
|Operating temperature||0° ~ 40° @ 95% Humidity|
|220 ~ 240 V AC / 50 ~ 60 Hz|
|RMS/AES power handling||@ 4 Ω Stereo||4 x 1250 W|
|@ 8 Ω Bridge||2 x 2500 W|
|@ 8 Ω Stereo||4 x 630 W|
|Dimensions||482 x 88 x 420 mm (W x H x D)|
|Unit height||2 HE|