CPA36

5/5

฿38,820.00

POWER AMPLIFIER 360W 100V

The CPA36 is a professional single channel 100V power amplifier with a power of 360 Watt, especially designed for most common 100V PA systems, and perfect to be used in combination with the CPR12 pre-amplifier.

SYSTEM SPECIFICATIONS
RMS Power360 W
Signal / Noise> 90 dB
THD+N (@ 1 kHz)< 1%
TechnologyClass A/B
ProtectionDC Short circuit
 Over heating
 Over load
 Signal limiting
CoolingDual speed controlled FAN
Operating temperature0° ~ 40° @ 95% Humidity
FrequencyResponse (± 3 dB)70 Hz – 18 kHz
PowerSupplyConventional (Transformer)
 Source230 ~ 240 V AC / 50 ~ 60 Hz (110~115 V AC / 50~60 Hz after connection change)
InputsSensitivity (1W/1m)-12 dB ~ 0 dB
 Impedance10 kΩ balanced
 ConnectorXLR female with Male Linkthrough
OutputsVoltage / Impedance100 V / 28 Ω
  70 V / 14 Ω
  38 V / 4 Ω
 Connector4-pin Euro Terminal block (Pitch – 5.08 mm with locking)

PRODUCT FEATURES
Dimensions482 x 88 x 330 mm (W x H x D)
Weight15.100 kg
Mounting19”
Unit height2 HE
ConstructionSteel
ColoursBlack
AccessoriesIncluded4-pin Euro Terminal Block outputs connector
  2-pin Euro Terminal Block 24V Power connector
 OptionalCPE100 Rack mount handles

It is designed as a no-nonsense amplifier with only the necessary controls and connections. This creates great simplicity in use and installation.


 There are several power output taps available for use in 100V, 70V and even 4 Ohm Low impedance installations and they are fitted with an advanced multipurpose protection circuit. The protection circuit detects DC malfunction, short circuit, overheating, overload and limits the signal when necessary.


 Another present feature is the 24 V DC connection for powering the amplifier with emergency power when the main power is shut down. At the back of the amplifier, there are trim potentiometers to set the input level, a high pass filter switch and a ground lift switch provided. 


The input connection is made with balanced XLR connectors, and there’s a signal output for linking with other amplifiers. The steel 19″ housing has a height of 2 HE.